June 29, 2021

These are the 5 Best Carpet Cleaning Methods Companies Use

By Donny Romero

You have many choices when choosing a carpet cleaner for your home or office. It is important to know the different methods of cleaning carpets.

These are the most popular types of carpet cleaning available:

Hot Water Extraction Cleaning

Hot water extraction cleaning, also known as steam cleaning carpets, uses hot water to extract dirt from the carpet and agitate it.

Hot water extraction cleaning is typically done by applying cleaning agent to the carpet, brushing and finally rinsing. After the carpet has been soaked in cleaning agent for a few minutes, it will be scrubbed with a carpet cleaner to remove the agent completely. Finally, the carpet can be dried in a dry area or at a controlled temperature.

Carpeted offices of average size, 3000 sq. ft, will normally take around 2 hours to clean. Drying time for carpeted offices should take at most 4 hours. Most carpet cleaning companies recommend that carpet be done in the late afternoon. After it’s done, you can let the carpet dry overnight so that office operations can resume as normal the next day.

Carpet Shampooing

Carpet cleaning was popular before the advent of encapsulation technology. It may look like shampooing carpet can be used to clean heavy stains. However, this technology has a disadvantage: it leaves behind a high volume of wet foam residues that stick to the carpet and takes a while to dry. Also, there is no way to quickly re-soil the carpet after shampooing. For more details find carpet cleaners near me

Foam encapsulation uses synthetic detergents as a base. Once dried, the foam will crystallize to form powdered forms. When the cleaning foam dries, any dirt particles that have accumulated in the carpet fiber will be powdered and vacuumed.

Carpet shampooing technology is losing ground to foam encapsulation. The former uses less water, which results in a shorter drying time than carpet shampooing. Foam encapsulation cleaning is favored by environmentalists because there are less chemicals left behind after cleaning than carpet shampooing.


Despite the good results this method achieved, it was not able to completely clean carpets with heavy soiling due to its limitations.

Bonnet Cleaning

This carpet cleaning process produces good carpet surface cleaning results. The machine uses a heavy-duty motorized machine that spins a pad and is then soaked in cleaning solution to remove dirt from the carpet’s surface.

Bonneting is very popular in hotels. It provides quick solutions to carpet cleaning in high traffic areas.

Bonneting is not a deep cleaning agent for carpet. Dirt underneath carpet can be re-deposited on the surface of the carpet in a short time. This could cause carpet to become soiled again quickly. Bonneting can cause chemical residue to build up in carpet because of the high pressure applied by the spinning pad and dirt remaining.

Dry Carpet Cleaning

The latest technology in carpet cleaning is dry carpet cleaning. This cleaning method, known as compound cleaning, has gained popularity and approvals from leading carpet manufacturers.

Many types of cleaning compounds and powders have been available since its invention in 1980s. This technology is relatively new, compared to conventional wet carpet cleaners that have been tried and trusted for decades. However, many people still question its effectiveness.

The best part is when the cleaning compound or powder is applied to the carpet bottom with a motorized rotating brush machine. This allows the carpet fibre to be opened up and the compound to settle within, resulting in deep carpet cleaning.

A cleaning compound made of biodegradable material is often used to clean carpets.

Different equipment manufacturers are able to differentiate themselves by creating their own cleaning compounds or powders formulas and customizing their equipment design.